한영넉스|Slim-type single-phase Solid State Relay HSR-SL series

HSR-SL series Slim-type single-phase Solid State Relay

- 22.4mm slim type
- Optimal heat dissipation design, semi-permanent lifespan
- Selectable integrated/separate heat sink
- Bolt, DIN Rail attachment method
- High insulation between input/output

Download

Product Inquiry

Specification Suffix code Dimension

The order from the left is the order in which the information is displayed at the bottom. If you cancel the check, the information will be excluded, and if you check, it will be printed out.

▍Suffix code

■ CE, UL certified products

Model	Code						Content
HSR-SL							Slim-type single-phase Solid State Relay
Control input voltage	D						4 - 32 V d.c.
Control input voltage	A						90 - 240 V a.c.
Rated load current		15					15A
		25					25A
		40					40A
Operating load voltage			L				24 - 240 V a.c. (Low voltage)
Operating load voltage			H				24 - 480 V a.c. (High voltage)
Method of operation				Z			Zero-cross switching (standard product)
Method of operation				R			Random switching
Heat sink & Option					S		Integrated heat sink (standard product)
					T		Heat sink + Bimetal mounted
					N		No heat sink ※ CAUTION 1) When using a separate heat sink, you must use a heat sink that meets the thermal resistance table.
point of contact						1C	1 Point of contact (Unmarked)
point of contact						2C	2 Point of contact (Unmarked) ※ CAUTION 2) Only for 15 A

※ CAUTION 2) 2 contact : Only available for 15 A items (HSR-SL□15LZS2C, HSR-SL□15HZS2C)

■ S-MARK certified products

Model	Code						Content
HSR-SL						-S	Slim-type single-phase Solid State Relay
Control input voltage	D						4 - 32 V d.c.
Rated load current		15					15A
		25					25A
		40					40A
Operating load voltage			L				24 - 240 V a.c. (Low voltage)
Operating load voltage			H				24 - 480 V a.c. (High voltage)
Method of operation				Z			Zero-cross switching (standard product)
Heat sink & Option					S		Integrated heat sink (standard product) ※ CAUTION 2) Please refer to the dimensions of the 25A and 40A heat sink.
					T		Heat sink + Bimetal mounted
					N		No heat sink ※ CAUTION 1) When using a separate heat sink, you must use a heat sink that meets the thermal resistance table.

Product

Controller

TPR/SSR/SMPS

Sensor

Switch

Signal Light

Control Part

Support

Download Center

COMPANY

▍Suffix code

■ CE, UL certified products

■ S-MARK certified products