Product

Support

Download Center

COMPANY

한영넉스

Solid State Relay > HSR-2E series : HANYOUNG NUX
view_plus
HSR-2E series Single-phase 2-wire control overcurrent sensing solid-state relay
- Accurate under/overload detection in On/Off cycle control situations.
- True RMS current measurement
- Display of operation status, output status, alarm LED
- Medium alarm, light alarm relay contact output
- Integrated heat sink
- Detection of TRIAC SHORT, load disconnection, overcurrent, and undercurrent
- 2-wire cutoff method (simultaneous control of two lines of single phase)
- Alarm record function (type of alarm and max current of 20ea)
- Application of bimetal at 60℃, 80℃

Download

Product Inquiry

Wish List

The order from the left is the order in which the information is displayed at the bottom. If you cancel the check, the information will be excluded, and if you check, it will be printed out.

print_icon

▍Connection Example

Connection Example

※ Caution

  • This product does not have an internal fuse.
    We recommend using an external fast-acting fuse as shown in the diagram.
  • Operating circuit power: terminals 7 and 8.
  • Control signal input: terminals 13 and 14.
  • Be sure to use wires and ferrule terminals of 0.75 SQ (mm2) or less for signal input terminals 3 through 14.
  • All wires, terminals, and pinhole terminals must be UL-certified.