Product

Support

Download Center

COMPANY

한영넉스

Solid State Relay > HSR-2E series : HANYOUNG NUX
view_plus
HSR-2E series Single-phase 2-wire control overcurrent sensing solid-state relay
- Accurate under/overload detection in On/Off cycle control situations.
- True RMS current measurement
- Display of operation status, output status, alarm LED
- Medium alarm, light alarm relay contact output
- Integrated heat sink
- Detection of TRIAC SHORT, load disconnection, overcurrent, and undercurrent
- 2-wire cutoff method (simultaneous control of two lines of single phase)
- Alarm record function (type of alarm and max current of 20ea)
- Application of bimetal at 60℃, 80℃

Download

Product Inquiry

Wish List

The order from the left is the order in which the information is displayed at the bottom. If you cancel the check, the information will be excluded, and if you check, it will be printed out.

print_icon

▍Description of Automatic Mode Jog Operation

Types of Operation

How to operate

Function Description

Switch operation

Press the jog switch

Menu function selection / saving

Jog operation

Rotate to the right

Increase menu change and setting value

Rotate to the left

Decrease menu change and setting value

■ Setting method

  • How to use User Setup Menu

    1. Press and hold Jog on the main screen to enter the user setting menu.

    2. On the user setting menu screen, the parameter name is displayed for 1 second, then blinks twice and the parameter setting value is displayed repeatedly.

    3. Rotate the jog left/right on the user setting menu screen to change the parameter setting value.

    4. If you press the jog button once briefly, you can enter the parameter setting value editing screen.

    5. After completing the setting, press and hold the jog on the user setting menu screen to save and return to the main screen.

    ※ If there is no operation for more than 5 seconds, it will automatically return to the main screen without saving.