Product

Support

Download Center

Company

Product Image view_plus
PN series Voltage output type Photoelectric Sensors
- Attached motion display light
- Built in output cutoff protecting circuit
- Attached sensitivity adjustment volume
- Selection of output operation due to control line
- Built in reverse connection of power protecting circuit

Download

Product Inquiry

Wish List

The order from the left is the order in which the information is displayed at the bottom. If you cancel the check, the information will be excluded, and if you check, it will be printed out.

print_icon

▍Specification

Model

PN-T3

PN-M1

PN-R02

Appearance

 PN-T3 PN-M1 PN-R02

Sensing method

Throug beam

Retro reflection

Diffuse reflection

Sensing distance

3 m

0.1-1 m

200 ㎜

Sensing object

Opaque object above Ø8 ㎜

Opaque object above Ø60 ㎜

White paper with no gloss 200 x 200

Power supply voltage

12 - 24 V d.c. (±10 %)

Current consumption

Emitter

20 ㎃ d.c.

30 ㎃ d.c. max

Receiver

18 ㎃ d.c

Control output

NPN voltage output, Less than 200 ㎃ (Load voltage : 30 V d.c.), Remaining voltage : 1 V d.c. max

Output action

Selection of L. ON/D. by the control line (Through beam is only with the receiver)

Response time

3 ㎳ max

Hysteresis

-

less than 20% of the sensing distance

Light source (wave length)

Infrared lightening LED (850 ㎚)

LED

Control output indicator : Red LED (But emitter of the through beam indicates the power with red LED)

Sensitivity adjustment

By the sensitivity adjusting volume (Exclude the emitter of through beam type)

Protective circuit

Power reverse connection protecting circuit and output break protecting circuit

Ambient illumination

Sunlight: max 11,000 Lux, incandescent lamp : max 3,000 Lux

Ambient temperature

Operating : -25 ~ 55 ℃, Storage: -40 ~ 70 ℃,(Without condensation)

Ambient humidity

35 ~ 85 % R.H. (With no condensation)

Insulation resistance

20 ㏁ min(500 V d.c.)

Dielectric strength

1,000 V a.c. for 1 min

Vibration resistance

10 - 55 ㎐ double amplitude : 1.5 ㎜, for 2 hours each in X·Y and Z direction

Shock resistance

500 m/s², 3 times each in X·Y and Z directions

Connection method

Cable extended, Cable : 4P, Diameter Ø4 ㎜, Length : 1.5 m(but transmitter is 3P)

Material

Case and lens : PC

Weight

Approx. 250g (included the weight of box)

Approx. 150g (included the weight of box)

Approx. 100g (included the weight of box)
  • (Note 1) The sensing distance can be varied depending on the size, surface condition, glossy, non-glossy of the sensing object
  • (Note 2) PN-TL3 is emitter and PN-TR3 is receiver when it is through beam type