Product

Support

Download Center

Company

Product Image view_plus
HPA-12 series Sensor controller
- Provide solid output contact
- (250V 3A, more than 100 thousand times)
- Widely used controller combining NPN/PNP
- Easy installation because of plug in method

Download

Product Inquiry

Wish List

The order from the left is the order in which the information is displayed at the bottom. If you cancel the check, the information will be excluded, and if you check, it will be printed out.

print_icon

Specification

Model

HPA-12

Appearance

 HPA-12

Rated Voltage

220 V a.c. (voltage fluctuation rate ±10 %) 50/60 Hz

Power Consumption

Approx. 4 VA

Power for Sensor

12 V d.c. (±10 %) below 50 mA

Connectable Sensor (Input)

Transistor output sensor of NPN, PNP

Control Output

Relay Contact : 1c

(250 V a.c. 3 A Resistive Load)

(Rated Load Lifetime : above 100 thousands times)

Response Time

Approx. 10 ㎳

Operating Ambient

Temperature/Humidity

-10 ~ 50 ℃, 35 ~ 85 % R.H. (with no freezing or no condensation)

Noise Immunity

Power cable : 1,500 VP, Pulse width : 0.5 μs (by a noise simulator)

Dielectric Strength

1,500 V a.c. for 1 minute (between the power and the output)

Insulated Resistance

20 MΩ (500 V d.c. at mega between the power and the output)

Vibration resistance

10 - 55 Hz (cycle for 1 minute), double amplitudes width : 1.5 ㎜, each X·Y·Z direction for 2 hours (but while the power is off)

Shock Resistance

100 m/s² (approx. 10 G), each X·Y·Z direction for 2 times(but while the power is off)

Weight

Approx. 260 g