▍Specification
|
Model
|
HPAN-C7
|
HPAN-CT7
|
HPAN-C7W
|
|
Appearance
|
 |
|
Function
|
Common
|
High function (timer)
|
Connecting 2 internal sensors
|
|
Power supply voltage
|
100 V - 240 V a.c. (50 Hz / 60 Hz) ± 10 %
|
|
Power consumption
|
Approx 5 VA
|
|
Power for sensor
|
12 V d.c. ( ±10 %), 200 mA Max
|
|
Input
|
[H] level 4 - 30 V d.c., [L] level 0 - 2 V d.c.
Pull up / Pull down resistance connection (4.7 kΩ) by NPN / PNP switch setting
Inversion function of NORM INV input signal
|
|
Control
output
|
Contact
|
OUT
|
OUT1, OUT2
|
|
NO contact : 250 V a.c. 3A resistance load,
NC contact 250 V a.c. 2A resistance load
Rated load lifetime : above 100 thousand times.
|
|
None
contact
|
O.C OUT
|
-
|
|
NPN open collector MAX 30 V d.c. 100 mA Max.
※ ISOLATION (isolated with inner circuit)
|
|
Output response speed
|
Relay contact : approximately 10 ms
|
|
NPN open collector : less than 5 ㎲
|
-
|
|
Operation mode
|
IN,ES AND function
|
IN,ES AND function operation/
AND trigger function operation
|
-
|
|
Timer function
|
-
|
3 types of timer set up mode
(ON DELAY,OFF DELAY, ONE SHORT DELAY)
time set up function (min-max)
|
-
|
|
Ambient Temp & Humidity
|
-10 ℃ ~ 55 ℃, 35 % ~ 85 % R.H. (Freezing, dew not allowed)
|
|
Noise immunity
|
Square wave noise due to noise simulator (1 us pulse per 16 ns) ±2 kV (Apply to power input terminal)
|
|
Dielectric strength
|
1 minute within 1500 V a.c., 60 Hz
|
|
Insulation resistance
|
10 MΩ (500 V d.c. mega between the power and the output)
|
|
Vibration resistance
|
10 - 55 Hz double amplituded 0.75 ㎜, X · Y · Z 2 hour for each direction(when power turned OFF)
|
|
Shock resistance
|
100 m/s² (approximately 10G), X · Y · Z 2 hour for each direction (when power turned OFF)
|
|
Certification
|
|
|
Weight
|
approximately 160 g
|
|
