▍Specification
Model |
HE□□B-□-□-N-□ |
HE□□B-□-□-O-□ |
HE□□B-□-□-T-□ |
HE□□B-□-□-L-□ |
Output type |
NPN Voltage output |
NPN Open collector output |
Totem Pole output |
Line Drive output |
Insulation Resistance |
Over 100 ㏁ (Base on 500 V d.c mega between terminal and case) |
Dielectric strength |
800 V a.c (Between terminal and case at 60 ㎐ for 1 minute) |
Vibration Resistance |
10 -55 ㎐ (Cycle for 1 minute), Double amplitude width : 1.5 mm, each X · Y · Z direction for 2 hours |
Shock Resistance |
Ø40 : 490 m/s² Max.
Ø50 : 735 m/s² Max. |
AmbientTemperature |
-10 ~ 70 ˚C (Without condensation), Storage Temperature : -25 ~ 85 ˚C |
Ambient Humidity |
35 ~ 85 % R.H |
Protection |
Protection IP 50 (IEC Standard) |
WireSpecification |
5P, Ø5.0㎜, Length : 1.5 m, Shield cable (Option : 2 m, 8 m, 10 m)(Line Driver Type : 8P, Ø 5.0 ㎜, Length : 1.5m, Shield cable) |
Approval |
|
Weight |
Ø40 : 170g
Ø50 : 200g
|
Accessory |
Ø40 : Ø6.0 or Ø8.0 mm Coupling, Ø50 : Ø8.0 mm Coupling, Bracket |
■ Electrical Specification
output signal |
A, B, Z phase |
A, B, Z, /A, /B, /Z phase |
Phase difference on Output |
Phase difference between A, B phase : T/4 ± T/8 (Cycle of A phase = T) |
Max Response Frequency |
300 ㎑ |
Power voltage |
5 - 12 V d.c /12 - 24 V d.c. ±5 % |
5/12/24 V d.c. ±5 %
|
Current Consumption |
60mA Max. (No-load) |
Connection method |
Cable extended type |
Control output |
Load voltage : 30 V Max.
Load Current : 30 mA Max.
Residual Voltage : 0.4 V Max.
|
* For Low
Load Current:30 mA Max.
Remaining Voltage:0.4 V Max.
* For High
Load Current:10 mA Max.
Remaining Voltage:
Power Voltage:-2.5 V min.
|
* For Low
Load Current:20 mA Max.
Remaining Voltage:0.4 V Max.
* For High
Load Current:20 mA Max.
Remaining Voltage:2.5 V min.
|
ResponseTime |
1 ㎲ Max.
(Cable length 1.5 m / sink=30 mA)
|
1 ㎲ Max.
(Cable length 1.5 m / sink=10 mA)
|
1 ㎲ Max.
(Cable length 1.5 m / sink=30 mA)
|
■ Mechanical Specification
StartingTorque |
Ø40: 4 x 10-3 N·m max.
Ø50: 7 x 10-3 N·m max.
|
Moment of inertia |
Ø40 : 4 X 10-6 kg · ㎡ max
Ø50 : 7 x 10-6 kg · ㎡ max
|
Permissible Shaft Loading |
Ø40 : Radial : Within 30 N , Thrust : Within 20 N
Ø50 : Radial : Within 50 N , Thrust : Within 30 N
|
Max.PermissibleRevolution |
5000 r/min |
|
