DPS series DIN rail installation type Power supply
- DPS Series
- DIN rail installation type
- Automation selection of input voltage due to function of automatic input selection
- Overcurrent, Overvoltage, Loaded with Overprotection function
- Low Output Voltage Regulation
- Various products from 15W to 240W
- The realization of low heat due to high efficiency
- Equipped with output voltage ON pilot lamp
- Equipped with DC OK sign relay output
CEEK

The order from the left is the order in which the information is displayed at the bottom. If you cancel the check, the information will be excluded, and if you check, it will be printed out.

print_icon

▍Specification

Model

DPS-15S

DPS-30S

DPS-50S

DPS-75S

Appearance

15S 30S 50S 75S

W×H×D (㎜)

25.0x90.0x103.0

40.0x90.0x103.0

40.0x90.0x103.0

56.0x124.0x97.8

Power output

15 W

30 W

50 W

75 W

Input voltage

110 - 240 V a.c. (Free power)

Output voltage

5 V, 12 V, 15 V, 24 V d.c.

12 V, 24 V, 48 V d.c.

Voltage fluctuation range

±5 ~ 10 % (Varies due to the internal VR)

Protective circuit

• Overcurrent, • Overvoltage, • overheat, • Output short-circuit protection, • DC OK display function

Dielectric strength

• 2,700 V a.c. 1 minute, detection current =10 ㎃, (input-output) • 1,500 V a.c. 1 minute, detection current = 10 ㎃, (input-FG)

• 500 V a.c. 1 minute, detection current = 10 ㎃, (output-FG) • 500 V a.c. 1 minute, detection current = 10 ㎃, (output-DC OK)

Insulation resistance

50 ㏁ or more. (Input-Output, FG), (Output-FG, DC OK)

Model

DPS-100S

DPS-120S

DPS-180S

DPS-240S

Appearance

100S 120S 180S 240S

W×H×D (㎜)

56.0x124.0x97.8

66.0x124.0x97.8

66.0x124.0x97.8

125.5x124.0x97.8

Power output

100 W

120 W

180 W

240 W

(※ However, DPS-240S-12 is 216W)

Input voltage

100 - 240 V a.c. 50/60 ㎐ (Free power)

100 - 120 V a.c. 50/60 ㎐/200-240Va.c. 50/60 ㎐(Automatic input selection)

Output voltage

12 V, 24 V, 48 V d.c.

24 V, 48 V d.c.

12 V, 24 V, 48 V d.c.

Voltage fluctuation range

±5 ~ 10 % (Depends on internal VR)

Protective circuit

• Overcurrent, • Overvoltage, • Overheat, • Output short-circuit protection, • DC OK display, • DC OK output function

Dielectric strength

• 2,700 V a.c. 1 minute, detection current =10 ㎃, (input-output) • 1,500 V a.c. 1 minute, detection current = 10 ㎃, (input-FG)

• 500 V a.c. 1 minute, detection current = 10 ㎃, (output-FG) • 500 V a.c. 1 minute, detection current = 10 ㎃, (output-DC OK)

Insulation resistance

50㏁ or more (input-output, FG), (output-FG, DC OK)