▍Specification
Model |
PFB-RN |
PFB-RP |
Appearance |
 |
Sensing method |
Through beam type, reflection type ( By the fiber cable ) |
Sensing distance |
By the fiber sensor |
Power supply voltage |
12 - 24 V d.c. ±10 % (Ripple less than 10%) |
Current consumption |
max 20 ㎃ |
Control output |
NPN open collector output, max 100 ㎃ (30 VDC) |
PNP open collector output, max 100 ㎃ (30 VDC) |
Output action |
L.ON, D.ON selection |
Time function |
NORMAL, ON-Delay, OFF-Delay (Delay time 40 ㎳ fixed) |
Responce time |
max 1 ㎳ |
Hysteresis |
Reflection type : Less than 10% of the sensing distance |
Light source (wave length) |
Infrared lightening LED (660 ㎚) |
LED |
Displayed by Bar LED |
Sensitivity adjustment |
Auto teaching/manual installution by using the set button |
Protective circuit |
Built in the reversed power supply connection protective circuit and output short protective circuit and motual interference prevention |
Ambient illumination |
• Sunlight : max 11,000 Lux • Incandescent lamp : max 3,000 Lux |
Ambient temperature |
-10 ~ 55 ℃(Surrounding storage temperature : -25 ~ 70 ℃) |
Ambient humidity |
35 ~ 85 % R.H.(With no condensation) |
Protective structure |
IP 40 (IEC) |
Insulation resistance |
min 20 ㏁ (500 VDC between the code and case, between the adjustment switch and case) |
Dielectric strength |
1000 VAC, 50/60 ㎐ for 1 min |
Vibration resistance |
10 - 55 Hz double amplitude 1.5 ㎜, for 2 hours each in X, Y and Z directions |
Shock resistance |
500 m/s² 3 times each in X, Y and Z directions |
Connection method |
• Code extended type,
• Code length : 2 m.
• No.of lines : 5 P,
• thickness : Ø4 ㎜.
• DIN rail installation structure
|
Material |
Case : heat resistance ABS |
Weight |
Approx. 150g (Included the weight of box and fixing bracket) |
|
