HANYOUNG NUX|Digital counter/timer GF series

▍Specification

Model			GF7A	GF4A	GF4A-□□□S
Power supply voltage			100 - 240 V a.c. 50/60 Hz (Voltage fluctuation rate : ± 10 %)
Power Consumption			▪P41T (6.6VA), P42T (7.3VA) ▪P61T (6.6VA), P62T (7.6VA) ▪T60T (5.6VA)	▪P41T (6.4VA) ▪T40T (5.6VA)	▪P41S (5.9VA) ▪T40S (5.4VA)
Display method			White 7 segment LED
Character size			▪P62T/P61T/T60T (11.5x5.2mm) ▪P42T/P41T (13.6 X 7.8㎜)	8.5 X 5.0 ㎜
Counting speed			1 / 30 / 1k / 5k cps	30 / 5k cps
Blackout compensation			10 Years (nonvolatile memory used)
Return time			500 ms or less
Timer operation error			Power start : ± 0.01 % ± 0.05 seconds or less (ratio to setting value)
Input			▪Input method selection by external switch (voltage input / no-voltage input) ▪Counter (composed of CP1, CP2, RESET), timer (composed of INHIBIT, RESET) ▪Voltage input : HIGH level (5 V - 30 V d.c.), LOW level (0 V - 2 V d.c.), input resistance (about 4.7 kΩ) ▪No-voltage input : Impedance in case of short circuit (1 kΩ or less), residual voltage in case of short-circuit span (2 V d.c. or less)
Min. input signal time			20 ms or more (RESET, INHIBIT input)
One-shot output time		1st stage	0.5 seconds fixed	-	-
One-shot output time		2st stage	0.05 to 5.8 seconds
External power supply			12 V d.c. 100 mA max.
Control out put	Contact	1st stage	OUT (SPDT, 1c)		OUT (SPST, 1a)
		2st stage	OUT (SPDT, 1c), OUT2 (SPDT,1c)	-
		Capacity	SPDT : NC (250 V a.c. 2a, 250 V a.c. 5 A), NO (250 V a.c. 5 A) Resistance load		250 V a.c. 5 A Resistance load
	Non- contact	1st stage	OUT (NPN Open collector)		-
		2st stage	OUT1, OUT2 (NPN 2 open collector circuits)	-
		Capacity	30 V d.c. 1000 ㎃ max
Relay life			Electrical (more than 50,000 times), Mechanical (more than 10 million times)
Insulation Resistance			100 MΩ or more (based on 500 V d.c. mega)
Dielectric strength			2,000 V a.c. 60 Hz 1 minute (between the conductive part terminal and the case)
Noise resistance			Square wave noise by noise simulator ± 2,000 V (Pulse width 1 ㎲)
Vibration			▪Durability : 10 - 55 Hz (1 minute cycle), Double amplitude 0.75 mm, X · Y · Z 2 hours each direction ▪Malfunction : 10 - 55 Hz (1 minute cycle), Double amplitude 0.5 mm, X · Y · Z 10 minutes each direction
Ambient temperature & humidity			-10 ~ 55℃, 35 ~ 85 % R.H.
Storage temperature			-20 ~ 65 ℃
Certification
Weight			▪P41T : 184g▪P42T: 190g ▪P61T : 184g▪P62T: 190g ▪T60T : 150g	▪P41T : 108g ▪T40T : 100g	▪P41S : 92g ▪T40S : 84g

▍Suffix code

Mode	Code					Content
GF	-					Digital counter/timer
Appearance	4A					48(W) X 48(H) ㎜
Appearance	7A					72(W) X 72(H) ㎜
Model		P				Preset counter/timer
Model		T				Total counter/timer
Display digits			4			4 Digit-display ( 9999 )
Display digits			6			6 Digit-display ( 999999 ) ※ GF7A model only
Control output				0		No output (Display only)
				1		1-Stage output
				2		2-Stage output ※ GF7A model only
Terminal structure					T	Terminal
Terminal structure					S	8 Pin plug ※ GF4A model only

■ Product composition

Terminal structure	GF4A Terminal	GF4A 8 Pin plug	GF7A Terminal
Model	GF4A - P41T / T40T	GF4A - P41S / T40S	GF7A - P41T / P42T / P61T / P62T / T60T

▍Dimension & Panel cutout

[Unit : ㎜]

■ Dimension

Classification	Type	GF4A	GF4A-S	GF7A
Product dimensions	W	48.0	48.0	72.0
	H	48.0	48.0	72.0
	D	79.8	63.3	75.0
	D1	6.7	6.7	8.2
	L	86.5	83.7	83.2

■ Panel cutout

Classification	Type	GF4A	GF4A-S	GF7A
Panel cutout	W1	45.0(±0.5)	45.0(±0.5)	68.0(±0.7)
	H1	45.0(±0.5)	45.0(±0.5)	68.0(±0.7)
	A	60.0	60.0	82.0
	B	60.0	60.0	100.0

Product

Controller

TPR/SSR/SMPS

Sensor

Switch

Signal Light

Control Part

Support

Download Center

Company

▍Specification