Model |
LP3 |
LP6 |
Power Supply Voltage |
100 - 240 V a.c. 50/60 Hz (Voltage fluctuation rate : ±10 %) |
|
Power
consumption
|
▪LP3-5ANN : Max. 9 VA
▪LP3-5A3RN : Max. 11 VA
▪LP3-5A5RN : Max. 11 VA
▪LP3-5A5NC/5A5PC : Max. 10 VA
▪LP3-5A5NT/5A5PT : Max. 12 VA
|
▪LP6-5ANN : Max. 8 VA
▪LP6-5A5NN/5A5PN : Max. 9 VA
▪LP6-5A3RN : Max. 9 VA
▪LP6-5ANC : Max. 9 VA
▪LP6-5ANT : Max. 11 VA
|
Display |
▪Negative-LCD ▪4 rows 2 columns ▪PV (white) ▪SV (green)
|
Character size |
▪PV (14.5 mm) ▪SV (10.0 mm)
|
▪PV (10.5 mm) ▪SV (6.7 mm)
|
Input Signal |
Non-contact (Max. 50 KHz, ON/OFF pulse width Min. 10 us)
Contact (Max. 30 Hz ON/OFF pulse width Min. 16.6 ms)
|
|
Input
|
Voltage |
[H] level (4.5 - 24 V d.c.)
[L] level (0 - 1 V d.c.)
Input impedance (4.5 kΩ)
|
Non-voltage |
Impedance during short-circuit (Max. 300 Ω)
Residual voltage (Max. 1 V)
Impedance during open (Min. 100 kΩ)
|
Measurement range |
▪F1, F2, F10, F11, F12, F13 : 0.0005Hz ~ 50KHz
▪F3, F4, F5, F6 : 0.01s ~ 3200s
▪F7, F8, F9 : 0 ~ 99999
|
Measurement accuracy |
▪F1, F2, F10, F11, F12, F13 : F.S. ±0.05% rdg ±1digit
▪F3, F4, F5, F6 : F.S. ±0.01 % rdg ±1digit
|
External power supply |
12 V d.c. ±10 % 100 mA |
Display cycle |
0.05 s / 0.5 s / 1 sec / 2 sec / 4 sec / 8 sec |
Display range |
-99999 ~ 99999 |
Power outagecompensation |
Approx. 10 years (non-volatile EEPROM only) |
|
Control
output
|
3-stage |
▪H, L - contact point (SPDT)
▪GO - contact point (SPST)
|
▪H, GO, L - contact point (SPST) |
5-stage |
▪HH, H, GO, L, LL - contact point (SPST) or,
Non-contact (NPN or PNP open collector)
*contact point (shared HH/H-COM output and shared LL/L-COM output)
|
▪HH, H, GO, L, LL - Non-contact
(NPN or PNP open collector)
|
capacity |
▪NO contact (250 V a.c. 5A resistance load)
▪NC contact (250 V a.c. 2A resistance load)
▪Non-contact (12 - 24 V d.c. 50 mA or less)
|
▪Contact (250 V a.c. 5A resistance load)
▪Non-contact (12 - 24 V d.c. 50 mA or less)
|
|
Relay
life cycle
|
Electrical |
Over 100,000 times (250 V a.c. 2A) |
Over 100,000 times (250 V a.c. 5A) |
Mechanical |
More than 10 million times |
More than 5 million times |
PV transmission output |
4 - 20 mA d.c. Load resistance 600 Ω or less (response time 800 ms or less) |
RS485 communication output |
Communication protocol - Modbus-RTU
Communication method - RS485 (2-wire half duplex)
Communication speed - 2400 / 4800 / 9600 / 19200 / 38400 bps
|
Vibration durability |
10 - 55Hz double amplitude 0.75 mm X, Y, Z each direction, 2 hr |
Insulation resistance |
Min. 100 MΩ (500 V d.c.), conductive part terminal - Non-conductive metal |
Dielectric strength |
2,000 V a.c. 60 Hz for 1 minute (between each conductive terminal) |
Noise immunity |
±2000 V (pulse width l μs, square-wave noise by noise simulator is applied among the power terminals) |
Ambient temperature |
-10 ~ 50 ℃ |
Storage temperature |
-20 ~ 60 ℃ |
Ambient humidity |
35 ~ 85 % R.H. |
protection structure |
▪IP66 (front) ▪Terminal block protection cover applied |
Certification |
|
Weight (excluding box) |
150 g |
108 g |
