Product

Support

Download Center

Company

Product Image view_plus
HY-PA02 series 2 Buttons hoist switch
- IP66 rain-proof structure, with a sturdy outer case made of high-impact ABS material.
- External bolts and brackets are made of SUS material to prevent corrosion.
- Wire fixing brackets are made of brass to prevent cable wire breakage and damage.
- In addition to standard nameplates, various characters and
  symbols requested by customers can be laser-marked.
- Contacts and control switches can be positioned and configured
  according to the desired application.
CE

Download

Product Inquiry

Wish List

The order from the left is the order in which the information is displayed at the bottom. If you cancel the check, the information will be excluded, and if you check, it will be printed out.

print_icon

▍Specification

Rated

Button Contact

6 A 250 V a.c. AC - 15

Control Switch (AR-10/AR-20)

5 A 250 V a.c.

LAMP

100 - 240 V a.c. / 12 - 24 V d.c.

Insulation Resistance

Over 100 MΩ (500 V d.c.)

Dielectric Strength

2,000 V a.c. for 1 min (Between live and non-live parts)

Protection Structure

IP66

Housing Material

Flame Retardant ABS Resin

Contact Material

AgSnO₂

Operating Temperature

-10 ~ 45 ℃ (No condensation)

Operating Humidity

45 ~ 85 % RH

Certification

 CE

※ To prevent the risk of cable breakage, ensure the cable wire is securely fixed to the hoist switch.

※ Always turn off the power during wiring. After wiring, check the inside of the switch for foreign objects (wire scraps, etc.)

※ Tighten terminal bolts securely during wiring. (1.2Nm)

※ Apply waterproofing between the cable holder inlet and the cable to prevent water or dust from entering the switch.