- Compact size LCD indicating total counter
- Battery built in so external power is not needed
- Reusing possible by replacing to the new battery
- Long battery life due to the less power consumption
- Non-voltage input of voltage input
- IP66 protective structure(front side)
Suffix codeDimensionConnection diagramSetting specificationInput connection diagramOperation chartThings to consider when replacing batteries
The order from the left is the order in which the information is displayed at the bottom.
If you cancel the check, the information will be excluded, and if you check, it will be
printed out.
▍Specification
Model
LC1
LC1-F
Input method
non-voltage input
voltage input (free voltage)
Power
No (run by battery, replacing possible)
Size
48 (W) X 24 (H) mm
Operation method
Up only
Computation speed
1 cps / 30 cps / 100 cps / 1 kcps
20 cps (fixed)
Input condition
▪Remaining voltage when disconnected : Max. 0.7 V
▪Max impedance when disconnected : Max. 10 kΩ
▪Min impedance when connected : Min. 1 MΩ
▪HIGH : 24 - 240 V a.c. / 6 - 240 V d.c.
▪LOW : 0 - 2 V a.c. / 0 - 2.4 V d.c.
RESET
Input type
non-voltage input
Min signal width
Min. 20 ms
Battery life
more than 7 years (approx. 25 ℃)
External setting switch
※ ① SW1, ※ ② SW2
※ ① SW1
External connection
terminal block (4pin)
Displaying type
LCD 7 segment reflection type, alphabet height 8.7 mm Black
Displaying digits
8 digits
Insulation resistance
Min. 100 MΩ (500 V d.C. mega standard, between the electric conduction terminal and exposed non - charging metal part)
Dielectric strenghth
2000 V a.c. (50/60 Hz for 1 min, between the electric conduction terminal and exposed non-charging metal part)
Vibration
Durability
10 - 55 Hz double amplitude 0.75 mm each direction of X · Y · Z for 2 hour
malfunction
10 - 55 Hz double amplitude 0.5 mm each direction of X · Y · Z for 10 min
Shock
Durability
300 m/s² (approx 30G) each direction of X · Y · Z 3 times
malfunction
100 m/s² (approx 10G) each direction of X · Y · Z 3 times