HANYOUNG NUX|Flat type proximity sensor UP-25F

UP-25F Flat type proximity sensor

- Applied exclusive IC for C-MOS.
- Wide range of power supply voltage (5-35 V d.c. : DC 3 wire type)
- Internal noise enhanced circuit.
- Applied the nonpolar two wire type.
- Able to install at metal surface directly Sensing distance 8m, thickness 10.5mm Flat type.

Download

Product Inquiry

Specification Suffix code Dimension Supporter Connection diagram Mutual interference and effects of surrounding metals

The order from the left is the order in which the information is displayed at the bottom. If you cancel the check, the information will be excluded, and if you check, it will be printed out.

▍Specification

■ Inductive DC 3 wire type / 2 wire type

Model		DC 3 wire type		DC 2 wire type
		NPN	UP25F-8N□□	Polartiy	UP25F-8T□□
		PNP	UP25F-8P□□	Non polarity	UP25F-8U□□
Size		25 x 49 Flat type		25 x 49 Flat type
Appearance
Standard sensing object (㎜)		Iron 25 X 25 X 1
Sensing distance		8 mm
Setting distance		0 ~ 6.4 mm
Hysteresis		Less than 10 % of sensing distance
Response frequency		200 Hz
Power supply voltage		12 - 24 V d.c. (Usable voltage range 5 - 35 V d.c.)		12 - 24 V d.c. (Usable voltage range 10 - 30 V d.c.)
ControlOutput	Open/Close capacitance	200 mA max (Resistive load)		100 mA max (Resistive load)
ControlOutput	Residual voltage	Max 1.5 V		Polartiy : max 3.5 V, Non polarity : max 5 V
Current consumption		Max 6 mA		-
Leakage current		-		max 1 mA
Operation indication		Red LED
Protective circuit		Power reversely connected protective circuit, Surge protective circuit and over current protective circuit are built in.		Surge protective circuit, Over current protective circuit are built in.
Degree of protection		IP67(IEC standard)
Connection structure		Cable type (Standard cable length 2m), Connector Cable type
Material		▪Case : PBT resin ▪Cable holder : Polyester elastomer
Certification
Weight	Cable type	approx. 60g		approx. 60g
Weight	Relay connector type	approx. 20g		approx. 20g

■ Inductive AC 2 wire type

Model		UP25F-8A□□
Appearance
Standard sensing object (㎜)		Iron 25 X 25 X 1
Sensing distance		8 mm
Setting distance		0 ~ 6.4 mm
Hysteresis		Less than 10 % of sensing distance
Response frequency		20 Hz
Power supply voltage		100 - 240 V a.c. (Usable voltage range 90 - 250 V a.c.)
Controloutput	Open/Close capacitance	200 mA max (Resistive load)
Controloutput	Residual voltage	Max 10 V a.c.
Leakage current		Max 2.2 mA
Operation indication		Red LED
Protective circuit		Surge protective circuit built in.
Degree of protection		IP67 (IEC standard)
Connection structure		Cable type (Standard cable length 2m), Connector Cable type
Material		▪Case : PBT ▪Cable holder : Polyester elastomer
Certification
Weight	Cable type	approx. 60g
Weight	Relay connector type	approx. 20g

■ Environment

Ambient temperature	-25 ~ 70 ℃ (Less than ±10 % of sensing distance at temperature 20 ℃)
Ambient humidity	35 ~ 85 % R.H
Insulation resistance	min 50 MΩ (500 V d.c. mega standard) between all terminals and the CASE
Dielectric strength	For 1 min at 2000 V a.c. 50/60 Hz (between the recharging part and case)
Vibration resistance	10 ~ 55 ㎐ (cycle 1 min, Double amplitude : 1.5 ㎜ 2 hours for each of X · Y · Z directions)
Shock resistance	500 m/s² 3 times to each of X · Y · Z directions

Product

Controller

TPR/SSR/SMPS

Sensor

Switch

Signal Light

Control Part

Support

Download Center

Company

▍Specification

■ Inductive DC 3 wire type / 2 wire type

■ Inductive AC 2 wire type

■ Environment

Popular search keywords

▍Specification

■ Inductive DC 3 wire type / 2 wire type

■ Inductive AC 2 wire type

■ Environment